Retrofit BT Cradle Wiring Help Please
 

Hi,

I have fitted the BT retrofit kit from Martin at bimmernav and looking for advice on fitting the cradle. 4 wires running of cradle, white, green, red brown. These connect to the 54pin connector and wondered if anyone had done this before and have details of what connects where.

Martin sent me an email months ago but its lost and not sure he is around at the moment.

Any help would be great :-)

Not sure what colour does what but the pins should be;

18 Pin elo connector ------------54 pin @ ULF
Pin-7 Pairing Button------------PIN 32
Pin-8 12v+ ign
Pin-10 12v+
Pin-17 Ground

Get a dvm (digital volt meter) and bell out the pins.

hope this helps.

Thanks ccfj1, Martin has contacted me with some information which I will try.