Eject box wiring help please !!
 

Hi All,
I am hopeing that some one can help me. I have a uk 2004 X3 which is not fitted with bluetooth wiring. I have been able to fit a Nokia kit which works fine. I have purchased a phone cradle for my phone and fitted a eject box also into the centre arm rest.
All I am wanting to do is connect up the wires so that when the phone is in its holder it will charge.
From this forum I have found what each of the 4 wires do. 1 Green Pairing 2 Brown Neg 13 White Cradle On 5 Red 12volt supply. I have connected up the brown and red wire to the cigar supply at the rear of the armrest to check that it will work as to charging it does not. Is anyone out there able to help do I have to bridge 13 White to 5 Red? to make it charge.
Once I have with someones help, can I connect to the wires onto the 6 CD changer in the arm rest if which wire to which?
Thanking you all in advance.
michael i

Yes you will need the cradle on signal to start the charging. I've a feeling I've read it's a 5V signal (annoyingly), but a quick search will confirm. Yes you can pick up the power from the CDC connector, there should be enough spare amps.