|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
06-16-2007, 04:02 PM
|
|||
|
|||
|
Brake Job and Service Charge
I just got my X5 3.0 2003.
I had the 60K Inspection II and all was OK but the tell me that the Brakes are below manufacture spec. The wanted to do it all for 1100 ( dealer ). Question: Do you suggest sticking with the dealer? How about a chain brake shop ( Meineke, Sears,..)? And how much should I expect to pay ( decently )? Thanks so much for your time, and sharing your exp. JL PS ( And I know this has been asked many times, but couldnt find the answer.) 
|
|
#2
06-16-2007, 07:45 PM
|
|||
|
|||
|
the brake job on my 4.6 which has more expensive parts is going to run me about $700
Pads: ebc red stuff up front about $100 Axxis deluxe for the rears about $50 Front and rear sensors $10 each Rotors: Powerstop cross drilled front about $220 (14 inch) OEM rear rotors about $100 (12.8 inch) Install at local shop: about $200
__________________
2002 4.6is Dinan S2 Titanium Silver/Black Alcantara DINAN Stage 4 Engine Software Automatic Transmission Software High FlowThrottle Body Free Flow Exhaust Cold Air Intake System High Flow Air Mass Meter OTHER CCFL Angel Eyes Stealth XM Radio in ashtray : FM Mod Pilot H3 Fog Bulbs Cleared Headlights: Hi/Lo Beams Hardwired Radar Detector IN PROGRESS Powerstop C/D Rotors: (on backorder) W/EBC Red Stuff (F) W/Axxis Deluxe (R) Dice Ipod: Aux Input for XM THINKING SMG II MK4 Bluetooth
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
