|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
07-08-2009, 11:03 PM
|
||||
|
||||
|
Need help on coding my 2008 made E87 120i
Recently I did a retrofit to add dynamic cruise control and multifunction steering wheel to my 120i by replacing a new steering column switch. Since the angle sensor is integrated in the steering column, so I have to code the angle sensor to make it work. I currently have SSS v32, which is the latest version, and all the tools for coding my car. However, the program work did not complete successfully. It just kept saying 'the coding could not complete successfully' and fault entries in DSC. During the coding work, SSS prompted me to ignition off the car, wait 10 seconds and iginition on the car and continue, I followed the instruction and then the coding failed. I did the coding by choosing 'LWS' in 'Service Function' and I did not connect my car to power supply. Now my question is: 1. Do I need to choose 'yes' when SSS prompts to ask me if new module is installed and then continue? (I chose 'No', and then chose 'load software') 2. Do I have to connect a power supply? 3. Is there anything I did wrong so that the coding was not successful? I really need your expert to give me some advice on this! Thanks a lot!
__________________
--2004 E53 X5 4.8is - ECE version; right hand drive; Located in Hong Kong; ext. black sapphire metallic; int. leather black; adaptive dynamic bi-xenon headlights; 16:9 onboard monitor w/o navigation; 20" genuine BMW Y-spoke 214 wheels with Bridgestone Dueler H/P Sport tires; Int. rear view mirror w/ compass. 
|
| Sponsored Links | |
|
|
|
|
#2
07-27-2009, 11:39 PM
|
|||
|
|||
|
For me it worked with carsoft 6.5 using the synchronization.
where can I find this SSS software?
|
|
#3
07-29-2009, 09:56 AM
|
||||
|
||||
|
Quote:
__________________
--2004 E53 X5 4.8is - ECE version; right hand drive; Located in Hong Kong; ext. black sapphire metallic; int. leather black; adaptive dynamic bi-xenon headlights; 16:9 onboard monitor w/o navigation; 20" genuine BMW Y-spoke 214 wheels with Bridgestone Dueler H/P Sport tires; Int. rear view mirror w/ compass.
|
|
#4
07-29-2009, 07:48 PM
|
||||
|
||||
|
You do need to tell it you replaced a control module, which should be the SZL. And I'm not sure if there is anything in the "retrofits" menues that may have to be done as you have changed parts from one to another and added previously uninstalled systems... Just look in the retrofits menus and see if you see anything listed that you added.
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is 
|
|
| Bookmarks |
|
|
|
|
Linear Mode
