LCI LED tailight upgrade on its way,

[r207]

Ok so i have a set of the new LCI LED talights from the 08 model X3 for me to fit to my 06.

As far as i can work out the new housing is very similar to the current one only using the LED bar across both lights as the DRL or parker lights when the headlights are turned on.

This being the case the other lights (turn,brake,adaptive brake and fog) are all pretty much same wire.

The LED bar will need some sort of resistor hooked up to it for it to work, if not then you will get a flicker every few minutes as the LCM tried to check for the bulbs staus.

ONce i have tested and sorted this out ill let everyone know and post up some pic... for now ill get back to studying the wiring diagram

Thanks