|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
09-12-2011, 08:03 PM
|
|||
|
|||
|
Peake Code Question-2882 and 2883
My 2004 X3 3.0i has been coming up with the same fault codes over the past month or so, triggering the SES light. The scanner shows codes 2882 and 2883 if I am reading it correctly (that could be the problem!) which indicates "mixture preparation bank1 and bank2." I cleaned the MAF and air filter which helps for a little while but after 20-30 miles the SES is back on, same codes. Engine is rough right at startup but otherwise drives fine. Any ideas? I have searched multiple forums and the information is hard to decipher. Thanks. Want to be prepared before taking in for service.
|
|
#2
09-12-2011, 11:56 PM
|
||||
|
||||
|
I would guess that it could be a vacuum leak. Codes give you symptoms, not causes. When you take it in your dealer will follow a test protocol for whatever BMW specific codes they get.
__________________
2007 X3 3.0si, 6 MT, Premium, White Retired: 2008 535i, 6 MT, M Sport, Premium, Space Grey 2003 X5 3.0 Steptronic, Premium, Titanium Silver 2002 325xi 5 MT, Steel Grey 2004 Z4 3.0 Premium, Sport, SMG, Maldives Blue
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
