Eisenmann Exhaust dimensions VS OEM 4.6is

[Sokm]

Hello Everyone..

Does anybody know if the Eisenmann muffler tip 2x160x80mm is the same dimensions as the stock tips for the 4.6is?

I like the stock tips on my 4.6, and would like to keep that look..

Thank you!

[X53Jay4.8is]

Originally Posted by Sokm

Hello Everyone..

Does anybody know if the Eisenmann muffler tip 2x160x80mm is the same dimensions as the stock tips for the 4.6is?

I like the stock tips on my 4.6, and would like to keep that look..

Thank you!

My Eisenmann Race on my 4.6is has 4 83mm round tips. Very different than the oem tip set-up. I have heard that some people on the board have cut off the old 4.6is tips and have a shop re-weld them back on the new muffler.

[Sokm]

Originally Posted by X53Jay4.8is

My Eisenmann Race on my 4.6is has 4 83mm round tips. Very different than the oem tip set-up. I have heard that some people on the board have cut off the old 4.6is tips and have a shop re-weld them back on the new muffler.

I had also read that... the 160x80mm option though mimics the OEM look. Was wandering if they were an exact match...

[X53Jay4.8is]

Originally Posted by Sokm

I had also read that... the 160x80mm option though mimics the OEM look. Was wandering if they were an exact match...

The Eisenmann catalog for the X5 Exhaust seems to only bring up the 4x83 mm Staggered pipes. Since Eisenmann hand makes each of these exhausts I am sure that for an additional fee they can install the tips of your liking. When you put our order in with an Eisenmann distributor have them provide you the tip catalog selection.

Shop Eisenmann GmbH - Sports exhaust, Pot d´échappement sport, el deporte silencioso, sport silenziosi, Газ выхлопного for Audi, BMW, Mercedes, Mini, Porsche, VW