|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
front pdc loom
is it inside the engine bay or on the bumper?. BMW E53 X5 FRONT PDC PARKING DISTANCE CONTROL LOOM WIRING HARNESS 6959979 | eBay should be easy to test this cheers
__________________
2001 black 4.4 , tv. satnav. and for the weekends 2002 hayabusa
|
Sponsored Links | |
|
#2
|
|||
|
|||
If I recall, I could not pull off the bumper and set it down without disconnecting that connector. So it doesn't extend much past the bumper as you remove it. I doubt you can access without removing the bumper. I want to say connector is on the passenger side (right side over on this side of the pond ).
__________________
Daily Drivers: - 2008 535i, 290,000km - 2004 X5 4.4, 01/2004 production, 380,000km - 1998 328i, 370,000km Track: - 1996 328i, track/race car, ~300,000km Winter: - 2013 Ski-Doo MXZ X 800 E-TEC, trail can - 2001 Ski-Doo MXZ 600 w/800 engine, exhaust - 1978 Ski-Doo Olympique 340 (vintage race sled) - 1977 Ski-Doo Olympique 340E |
#3
|
|||
|
|||
cheers, at least its on the "outside" of the car , and i dont have to fiddle within the engine bay should be an easy job
HAHA doubtfull
__________________
2001 black 4.4 , tv. satnav. and for the weekends 2002 hayabusa
|
#4
|
|||
|
|||
I knew I took pics and posted at some point. Here you go. Zoom into the right side of vehicle (left of pic) and you see the connector.
http://www.xoutpost.com/bmw-sav-foru...esolved-2.html
__________________
Daily Drivers: - 2008 535i, 290,000km - 2004 X5 4.4, 01/2004 production, 380,000km - 1998 328i, 370,000km Track: - 1996 328i, track/race car, ~300,000km Winter: - 2013 Ski-Doo MXZ X 800 E-TEC, trail can - 2001 Ski-Doo MXZ 600 w/800 engine, exhaust - 1978 Ski-Doo Olympique 340 (vintage race sled) - 1977 Ski-Doo Olympique 340E |
#5
|
|||
|
|||
nice one ,
going to hopefully have a play saturday morning bumper removal, then test loom with multimeter, and hopefully repair , at leisure
__________________
2001 black 4.4 , tv. satnav. and for the weekends 2002 hayabusa
|
#6
|
|||
|
|||
Well , that went well, NOT . took ages to get the bumper off, due to work getting in the way, and is it a seperate loom,
N O its built into the main loom on mine , had a look at the state of the wiring , nothing wrong with the loom it seems, accustic generator WTF is one of them
__________________
2001 black 4.4 , tv. satnav. and for the weekends 2002 hayabusa
|
#7
|
|||
|
|||
just thought id update you guys on my progress so far.
after the farce earlier with the bumper, and the slight removal of the loom insulation, I had another go today removed the bumper, and re coated the loom with tape , inspecting as I went.. nothing un towards. then removed front pdc's from bumper and xhange each in turn with a new pdc sensor, nothing , still broke , thought sod it , and put it all back together and parked car on road . then remembered one of the members on here saying the car bongs when the key's in the ignition . hmmmm I removed the drivers kick plate where the gong is and have a guess what I found , a bloody connector off !!!!!!!!! re attached I now got working pdc's !!!!!!!! victory is mine !!! error in bmw scanner was front accustic generator off
__________________
2001 black 4.4 , tv. satnav. and for the weekends 2002 hayabusa
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|