Quote:
Originally Posted by X5only
Why don't you get DIS/SSS or ISTA D/P and do all the coding and diagnostics yourself? Those are dealer level apps and therefore are easy to use. INPA, NCSExpert, WinKFP and such are factory level apps and therefore relatively difficult to use and require technical understanding of what you're doing. NCSExpert or WinKFP can brick your car if wrongly used in write mode e.g., writing wrong code for the wrong module.
BMWCoding.com sells ISTA D and P 2015 for around $50. ISTA is the current dealer app.
|
Before placing my SOS on this forum, I had ordered DIS GTI v44 and v57 SSS from Germany. If I can read it in English, I could be ok. {Mein Deutsch ist nicht so gut). I am still intrigued by these professionals. My current need is tyo get the 2-Axle Suspension in operation. I replaced a leaking left front air spring. I also replaced the Control Module. The Control Module seems to need some coding before the INPA will save the settings. When I looked at NCS Expert, I was afraid to make any changes and I could not navigate the system. Thus, my request for help.
06-20-2016, 02:00 AM
Threaded Mode
