Time for headlight upgrade, taking suggestions...

[Serb404]

My driver side has a few scratches on it and just getting tired of the yellow corner amber so instead of baking them I'd rather purchase a full set and install them

any suggestions or past experience from members about aftermarket lights?

thanks in advance

[Ricky Bobby]

How deep are your pockets? - 2003 - 2006 headlights can't be baked (permaseal) - so unless you want to drop about 1k-1500 bucks on the Euro xenons with clear corners - all you are left with is cheap Chinese junk aftermarket units - polish your stock ones if you don't have the coin for the Euro's , in my opinion

[Serb404]

Originally Posted by Ricky Bobby

How deep are your pockets? - 2003 - 2006 headlights can't be baked (permaseal) - so unless you want to drop about 1k-1500 bucks on the Euro xenons with clear corners - all you are left with is cheap Chinese junk aftermarket units - polish your stock ones if you don't have the coin for the Euro's , in my opinion

well I already did polish them so after still visible scratches on my driver side it's just annoying but mine are like this

[Ricky Bobby]

If they are factory xenons I would just keep a good coat of wax or sealant on them and pop some fresh xenon bulbs in there and a whiter set of angel eye bulbs - most cost effective way to upgrade the look - you'll need to drop at least a grand to get the euro clear corners

[Serb404]

Originally Posted by Ricky Bobby

If they are factory xenons I would just keep a good coat of wax or sealant on them and pop some fresh xenon bulbs in there and a whiter set of angel eye bulbs - most cost effective way to upgrade the look - you'll need to drop at least a grand to get the euro clear corners

already upgraded to some whiter angel eye bulbs and alright I was browsing ebay for some and came across the venoms but I know how you feel about those lol

[Ricky Bobby]

I guarantee you'd feel the same about them if you bought them and saw them in person - ugly as sin and look horrendously aftermarket - I won't even get started on the quality lol

[tmv]

There's someone in NY/NJ area that can open and clear the corner. pnoyako85 had them done on his old 4.8iS. I'd PM him for more info.
http://www.xoutpost.com/members/pnoyako85.html

[Serb404]

Originally Posted by Ricky Bobby

I guarantee you'd feel the same about them if you bought them and saw them in person - ugly as sin and look horrendously aftermarket - I won't even get started on the quality lol

ok lol I get where you're coming from, I don't want your blood pressure rising now

Originally Posted by tmv

There's someone in NY/NJ area that can open and clear the corner. pnoyako85 had them done on his old 4.8iS. I'd PM him for more info.
http://www.xoutpost.com/members/pnoyako85.html

yeah I was actually going to buy his old headlights but there sold already haha