Anyone need an N62 cyl head?!

[williamx5]

Good day all!!

I need six exhaust valves... New would cost me about $240 or so... Figured I would get a good used cyl head for less than that and divide up the remains for whom ever needed the stuff...

So, if anyone is looking for a good cyl head, let me know so I can get the correct side you need... All the exhaust valves will be used for my project, but....... Or if you just need the cams or lift assy... Or oil rail... Or just a cam cap...

Cheers!!

[upallnight]

Originally Posted by williamx5

Good day all!!

I need six exhaust valves... New would cost me about $240 or so... Figured I would get a good used cyl head for less than that and divide up the remains for whom ever needed the stuff...

So, if anyone is looking for a good cyl head, let me know so I can get the correct side you need... All the exhaust valves will be used for my project, but....... Or if you just need the cams or lift assy... Or oil rail... Or just a cam cap...

Cheers!!

Cam caps and crankshaft caps are aligned bore in the manufacturing process, so you will need to get the cap(s) align bored with your engine if you intend to use them with another engine.