|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
02-04-2016, 11:19 AM
|
|||
|
|||
|
Lower Oil Pan Gasket
Can someone advise on the following? When screwing in the bolts, does anything need to be applied to the threads?Is there a certain order the bolts need to be applied or can they be randomly screwed in?Does anyone one have a torque spec for the bolts? Thanks to all who answer. 
|
| Sponsored Links | |
|
|
|
|
#2
02-12-2016, 05:26 PM
|
|||
|
|||
|
[QUOTE=tomsawyer;1068052]Hey Everyone - I have a 2005 4.4i N62 and the lower oil pan gasket is leaking. Doesn't look like too horrible of a job but wanted some advice. I purchased the gasket and was told I needed the 23 bolts that holds the pan so I purchased both for about $40.
Can someone advise on the following? When screwing in the bolts, does anything need to be applied to the threads?Is there a certain order the bolts need to be applied or can they be randomly screwed in?Does anyone one have a torque spec for the bolts? Just got the parts from the dealer - 1 lower oil pan gasket and 23 bolts for the pan. Can you believe the bolts are not all the same size! There are 4 different size bolts that hold the pan! Anyway, can anyone advise if the bolt threads need to be treated with anything and what the torque specs are for them? I really appreciate it. Thanks in advance. Thanks to all who answer.
|
|
#5
03-04-2016, 06:03 PM
|
|||
|
|||
|
I'm an M62 guy, but will look this up for you after the kiddies are in bed. This is where the eBay DVD of TIS is helpful (the BMW technical instructions).
__________________
David.X5 2001 X5 4.4i Sport SOLD! at 160k miles
|
|
| Bookmarks |
|
|
|
|
Linear Mode
