alignment custom spec help

[1iwilly]

hello to all
need help from those that been there and done that.
i need a wheel alignment but for the rear i don't want it to stick out like it does on the bottom from fact spec.so the tech said to find out what spec i want for the rear to be
i said what ever factory stock is for 02 x5 3.0i make it 1 less.example if it is -2.05 well then go -1.05 but he said i need to be more precise to the actual spec so am asking
what is the spec you guys use so the rear is not as straight as the front but not as toe out on the bottom from factory.??thanks

[cn90]

I had the same issue with my E39 1998 582i, so I reduced the Rear Camber to
- 1.3 degrees or so.

I wrote the DIY Alignment below:

http://www.bimmerforums.com/forum/sh...heel-Alignment

[MINIz guy]

-1º is less than BMW specification but more than the front, which has about -.5º.

[1iwilly]

so does anybody have or know where i can get the fact spec.??thanks