Size of facelifted Angel Rings?

[pearlpower]

I purchased some angel rings for my 04 and before I rip everything apart I noticed the larger ring appears too large. It seems most sellers sell the same kit for 99-04 models and the items I received are 127mm/158mm in size.

Am I eye-balling them incorrectly or are the 04s smaller in size? Thanks

[Fifty150hs]

Originally Posted by pearlpower

I purchased some angel rings for my 04 and before I rip everything apart I noticed the larger ring appears too large. It seems most sellers sell the same kit for 99-04 models and the items I received are 127mm/158mm in size.

Am I eye-balling them incorrectly or are the 04s smaller in size? Thanks

If I'm not mistaken the head light housings for the facelift models are sealed shut using a plastic welding method. They can't be opened without cutting them apart. I seem to remember several other threads here from people trying to get into these housings. You may want to do a search and rethink this one.

[pearlpower]

Originally Posted by Fifty150hs

If I'm not mistaken the head light housings for the facelift models are sealed shut using a plastic welding method. They can't be opened without cutting them apart. I seem to remember several other threads here from people trying to get into these housings. You may want to do a search and rethink this one.

Thanks, already did. I'm not worried about opening them, just the size of the rings is in question.

Spare vehicle so if it's down a few days...

[tmv]

Should be 120mm. However the 7mm difference in diameter shouldn't be that bad.

[Ricky Bobby]

The low beam rings on facelift should be around 120mm and the high beam should be around 145mm