Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Fluid Motor Union
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-22-2017, 08:54 AM
Member
 
Join Date: Jun 2015
Location: Southlake, Texas
Posts: 2,094
X53Jay4.8is is on a distinguished road
BMW X5 4.6is Big Brake Brembo Upgrade

So last night I began my installation of my Big Brake Brembo Upgrade. I will provide all the part number so that anyone who wants to venture down this path may do so. Long story short :It works well

UPDATED WITH PART NUMBERS

Parts:
BMW E70 X5M Calipers Part No. 34116789341/34116789342
BMW F85 X5M rotors (395 X36mm) Part No. 34112284901/34112284902
BMW E70 X5M OE Pads Part No. 3411679964
BMW E70 X5M Cailper mounting bolts (4) Part No. 34116778234
BMW F85 X5 M rotor set screw, rotor to hub (2) Part No. 34111123072
BMW E70 X5M Front Brake Pad Sensor (1) Part No. 34356792568
Spacer of your choice (minimum of 3mm)
G2 Caliper Paint: Monte Carlo Blue BMW B05

Notes: You may use E70 X5M rotors and rotor set screw in lieu of F85 parts listed above. The rotors are exactly the same dimension; however I preferred to have the cross drilled version of the rotors to match my rear rotors so I went with the F85 rotors instead. Its a personal choice.

I chose to go with a set of Carbotech 1521 pads for the brake upgrade because they are awesome from the ones I installed on my E39 M5 ( No noise, barely any dust generation and most of all strong bite). Once again another personal choice.

I chose to replace my brake lines with a set of stainless steel braided ones from ECS tuning because their fitment/connection is OE type so very easy to install.

Spacers: This front kit will require 3mm of clearance with factory 20 inch wheels. This should not be a problem for many of us X5ers because most of us already run spacers on our X5. My 4.6is has H&R 20mm spacers up front and 30mm spacers out back.

Minor trimming of brake rotor dust shield (See last image of material removed). Its just a strip from the dust shield 1/4 inch wide by 2 inches long.

Weights:
4.6is/4.8is OE rotor: 26lbs
4.6is/4.8is OE Caliper w/mounting bracket: 20.6lbs.
Bridgestone OE RFT F/R: 41lbs./47lbs.

F85 X5M OE Rotor: 37.4lbs.
E70 X5M OE Caliper: 20.2lbs.
Vredestein Utrac Vortis Front/Rear: 30lbs./35lbs.

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

Last edited by X53Jay4.8is; 06-24-2017 at 04:09 PM.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 02:40 PM.
vBulletin, Copyright 2025, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.