|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
PDC problem
many thanks Steve |
| Sponsored Links | |
|
|
|
|
#2
|
|||
|
|||
|
in my case what happens is:
when PDC is on, the long continuous beep is heard (like when you are already too close to the object) even though there is nothing around the car... after a second or too the sound disappear, but the sensors are not working. also, is the green led continuously on in your case or flashing green? mine is flashing and I know it should be on
|
|
#3
|
|||
|
|||
|
Thanks for the reply, The led on the pdc switch is on constant, not flashing. I dont get a continuous beep when the system comes on, the rear parking sensors are working as they should, all 4 front sensors "click" when you put your ear to them when pdc is on but no warning beep when getteing close to an object.
|
|
#4
|
|||
|
|||
|
Quote:
|
|
#5
|
|||
|
|||
|
its quite audiable if you put your ear on each sensor, switch ignition on to position 2, press pdc button and put your ear on each sensor
|
|
#6
|
||||
|
||||
|
Quote:
If you hear the front sensors clicking and no LED flashing on the console, it might be the speaker for the Front PDC that's not working especially since the rear sensors work. Usually, if there's a fault anywhere front or back, the whole system will fail and give you a long beep with flashing LED on the button. I think the speaker for the front is located under the driver side dash near the OBD port. In the wiring diagram, it's called the H10 Gong. I would start there.
__________________
2000 Z3 2.3 Steel Gray 2004 X5 4.4i Jet Black Last edited by nra0707; 05-13-2010 at 08:45 AM. |
|
#7
|
|||
|
|||
|
Quote:
|
|
#8
|
||||
|
||||
|
If this helps any, here's the pic from the wiring diagram.
__________________
2000 Z3 2.3 Steel Gray 2004 X5 4.4i Jet Black |
|
#9
|
|||
|
|||
|
Thats a massive help, thanks
|
|
#10
|
||||
|
||||
|
Get Navcoder and you can test each sensor individually. Then replaced just the busted ones.
|
![]() |
| Bookmarks |
|
|
|
|