|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
01-28-2018, 02:35 PM
|
||||
|
||||
|
Coolant level sensor leaking.
Folks, silly fool here.
I had to move the coolant header tank and managed to pull out the level sensor. This now has a small leak. The 0 ring looks okay but I suspect it is not. Can I get new 0 ring? Or do I need a new sensor please? Car is a 4.8is 2006 model. Sent from my iPhone using Tapatalk 
|
|
#2
01-28-2018, 04:56 PM
|
|||
|
|||
|
You probably need a new coolant tank. AFAIK the sensor doesn't come in contact with the coolant. It is activated by a magnet in the float.
__________________
1988 325is (purchased new) sold 2004 X5 3.0 2005 X3 2.5 2008 X5 3.0 (new to me)
|
|
#3
01-29-2018, 01:58 AM
|
||||
|
||||
|
Wrap the o-ring with 3-5 wraps of Teflon tape. If leak stops it was the o-ring. I just did this life hack on my lower hose temp sensor.
Tip: stuff a rubber glove with foam and you can quickly stuff in the hole while working on the o-ring without draining coolant Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife)
|
|
#4
01-29-2018, 02:51 AM
|
||||
|
||||
|
Thank you for the help here folks. I shall probably remove the header tank and have a good look at what is going on here. This is turning into a painful headlight bulb replacement ;^(
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
