|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
adaptive headlights
|
Sponsored Links | |
|
#2
|
|||
|
|||
Quote:
|
#3
|
|||
|
|||
I'd swap that off and if you take the bumper off don't start taking the headlight apart until you plug the side not working into the side that's working first to see if it's something attached to the light.
|
#4
|
|||
|
|||
Craziest thing. Took the bumber off and switched the headlights. The headlight workednon the other side. The Led in the cabin wasnt blinking so i figured lets try plugging jt back into the non working side and now its working. Could it have been as simple as a loose wiring harness. Im about to go back out and plug the other side in so they are both plugged in at the same time just to maks sure.
|
#5
|
|||
|
|||
HA let me know. I had the same issue. When I took off the bumper I'd get the non working side working for a minute then it would go out. I kept thinking it was the harness, I was jiggling it etc until I finally discovered what it is.
|
#6
|
|||
|
|||
Update, i tried pluggjng both headlights in at once and back to the same. Driver side not working again but no blinking led. So i unplugged the passenger side and tried again. The driver side head didnt turn on but after about 15 sec it kicked on. So i started thinking, what if i plug it in while its turned on and boom both side are working. I then cleared the codes and all the ahl module has no more codes. The lcm module still says that ahl fault but the led light isnt blinking. I turned the car off, pull the key and tried again. Boom both are working. Its been about 2 huors and im going to go out snd see if they will come in still. Im leaning toward buying the ahl. Does it need to be programed? You said its in the glove box?
|
#7
|
|||
|
|||
It's behind the glove box. You gotta drop the glove box which is about 5 screws and it's in a slot behind it. Takes about 10 minutes to do. Your symptoms sound exactly the same as mine. I don't think it needs to be coded just the lcm does.
|
#8
|
|||
|
|||
Lcm does if you change that is what I mean. I'm sure it's the module I'm talking about behind the glove box.
|
#9
|
|||
|
|||
this is what your looking for behind the glove box. its in a slot with a tab that you pull out.
https://www.ebay.com/itm/BMW-X5-4-8i...8AAOSwHLNZQbid |
#10
|
|||
|
|||
Okay i ordered it today. Hopefully thats the issue, thanks for your help
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|