Self Leveling Suspension Inactive question...

[ajacks8]

I had the "Self Leveling Suspension Inactive" error come up two weeks ago. The code read static capacity of compressor. I cleared the code and it came back after 5 or so more drives. I picked up the compressor rebuild kit from BagpipingAndy, but my question is - if none of my corners are sagging currently and I've driven 5 times since the indicator showed up again...would anyone advise to not drive it a few more times before being able to repair? I won't get to the repair until this weekend, but will ground it if I should. Could anyone advise me? It's an '06 4.8is with original suspension setup (some fresh bags, some bags with age). Thanks!

Adam

[andrewwynn]

If you can get the compressor to run once by resetting the code that is the route I would take.

You will be riding on the bump stop no shock or spring if the bag is deflated. You risk some significant damage if you hit a solid obstruction like a bad pot hole in that condition.


Sent from my iPhone using Tapatalk Pro

[ajacks8]

Originally Posted by andrewwynn

If you can get the compressor to run once by resetting the code that is the route I would take.

You will be riding on the bump stop no shock or spring if the bag is deflated. You risk some significant damage if you hit a solid obstruction like a bad pot hole in that condition.


Sent from my iPhone using Tapatalk Pro

Thank you for THAT! I will get code cleared before next drive.