x5 4.8is ride height sensor wiring diagram

[m3j0n]

Wire harness was destroyed by a failed front driver side axle. I am rewiring the a stock repair kit into the car, but its a plug with generic green wires. I have no clue where the 6 pins are supposed to be oriented in the clip. Would anyone have a diagram of wire color to corresponding pin location within the clip? Thanks!

[crystalworks]

Here you go.

https://www.newtis.info/tisv2/a/en/e...ensors/pyU9641

[m3j0n]

thank you, but for the diagram I am looking at (front left ride height sensor), it only shows 3 wires, but its definitely 6.

[crystalworks]

Originally Posted by m3j0n

thank you, but for the diagram I am looking at (front left ride height sensor), it only shows 3 wires, but its definitely 6.

I see all 6 wires... just scroll to the right.

Edit: Nevermind... that's the front right sensor that shows 6 wires. The driver's side only shows 3 for some reason.

Double edit: Just got under my 4.8is. Driver's side ride height sensor only has 3 wires so that diagram is correct.

[m3j0n]

Originally Posted by crystalworks

I see all 6 wires... just scroll to the right.

Edit: Nevermind... that's the front right sensor that shows 6 wires. The driver's side only shows 3 for some reason.

Double edit: Just got under my 4.8is. Driver's side ride height sensor only has 3 wires so that diagram is correct.

i noticed that... its only using 3 wires in a 6-pin clip. Thanks!