Installing Fogs

[CLEE3]

Don't Laugh, but I cant get the plastic cover off thats around my fog lights. I dont want to break it off. People with experience, how did you guys take it off not breaking the plastic cover? thanks

[ekaz]

i just pulled. carefully of course.

[Verbalkint]

Originally Posted by ekaz

i just pulled. carefully of course.

Concur.

Check out posts 2, 5, and 6 in this thread.

[CLEE3]

OKay, I got the plastic cover off. But the fog lamp wont freakin come out. I took out the two screws too. Im so pissed! Help me out! SOrry Im not that great with cars. haha

Chris

[Verbalkint]

Originally Posted by CLEE3

OKay, I got the plastic cover off. But the fog lamp wont freakin come out. I took out the two screws too. Im so pissed! Help me out! SOrry Im not that great with cars. haha
Chris

I grabbed the fog light assembley and gently pulled it out at a slightly upward angle. It came right out.

[razrv3]

Originally Posted by CLEE3

OKay, I got the plastic cover off. But the fog lamp wont freakin come out. I took out the two screws too. Im so pissed! Help me out! SOrry Im not that great with cars. haha

Chris

There's a little plastic clamp (?!! don't know how to name that in English...) that's part of the light assembly, you have to release that carefully (try with a flat screwdriver) and then pull the whole thing out. not hard at all...
hope this helps

[CLEE3]

I can see what the foglamp is holding on too. But there is no way that I can fit a flat head screw driver to unclip the clamp. This is pissing me off!

[MarkR]

I just wiggled it around and turned it side to side until it came right out. Just be patient and it will come out.

[bingw325]

Originally Posted by MarkR

I just wiggled it around and turned it side to side until it came right out. Just be patient and it will come out.

Be patient, If you feel getting piss off.. check the wednesday weasel hehehehe

[razrv3]

Yeah, I just changed mine....You have to tilt it a little then just pull it out and it clicks right off.
Fairly easy...