What Cheered You Up This Week?

[Clockwork]

Originally Posted by Overboost

KL-0 ignition off

KL-R ignition 1st position (ACC)

KL-15 ignition position 2 (ignition on)

KL-50 ignition switch position 3 (start command)

Awesome, thanks.

Sent from my Pixel 3 using Tapatalk

[Clockwork]

Originally Posted by wpoll

Nothing scary - it simply changes at which ignition switch position the audio system is active. What I meant was I reckon a few folk may have changed the setting accidentally then wondered why the audio (radio) behaves differently.

Ok I just played with all settings. Thanks so much for this and yes I made sure to leave my audio setting as was originally (tho I did go into it and play)


Sent from my Pixel 3 using Tapatalk

[Clockwork]

Originally Posted by Purplefade

Hey Clockwork,

I got side-swipped by my (wifes) bathroom project and haven't yet finished it, but what I did was make a cardboard "mold" (using that thin but stiff type of cardboard that you find on the back of a yellow note pad, scissors and tape) of the entire back cavity of the truck and then wrapped the inside of the mold with plastic wrap, laid in fiberglass matte and used resin and hardener to set it up - so far so good.

I am going to finish it by tracing the face of it on 1/4" ply wood (doubling up just the area where the sub will screw in) and cutting that just inside the line so that it will fit inside the lip of the fiberglass enclosure. Tap some screw hole through the enclosure into the plywood, add a bead of construction adhesive for good measure and seal the enclosure to the face board and wrap the entire enclosure in a second layer of fiberglass for structural integrity.


I figured that by using fiberglass and keeping it thin and rigid that I could use more of the air space and take up more of the nooks and crannies vs using 1/2" or 3/4" particle board like most do.


I ordered everything online from home depot and had it dropped off on my front porch for an additional $8.99 delivery fee - it was awesome!


Edit: - Missed the part about cost - best part, it was SUPER cheap!
I spent like $15 on the resin, $12 on the fiberglass cloth and matte (I used cloth to mold the inside initially, it's softer, and will go back over the whole box with the matte once the face is attached), and the plywood was like $9 if I recall right.


It required:
4'x4' piece of thin, rigid cardboard
scissors
painters tape (I used pt because it doesn't stick down until you press it good which gave me an opportunity to adjust the pieces)
1 - $14 quart resin w\hardener included
1 - $6 package of fiberglass cloth
1 - $6 package of fiberglass matte
2 - cheap paint brushes
rubber gloves
1 - $9 4'x4' piece of 1/4" plywood
1 - $2 10oz tube of liquid nail
caulk gun
jig saw


And my wife having an absolute fit about the smell of the fiberglass on me when I came in from the garage...

Oh good Jesus. I will just buy one hahahah.
Thanks so much for the how to... Tho. I love that some ppl have the materials and know how to do such a project. Speaking of projects, good luck with them all.

Sent from my Pixel 3 using Tapatalk

[Purplefade]

Originally Posted by Clockwork

Oh good Jesus. I will just buy one hahahah.
Thanks so much for the how to... Tho. I love that some ppl have the materials and know how to do such a project. Speaking of projects, good luck with them all.

Sent from my Pixel 3 using Tapatalk

HA - there’s a part of me wishing I had just bought mine now too! But with nothing but time on my hands, it kept me busy for a bit

Now all I have to do is anchor the face and finish my last wrap.

Thanks for the good luck wishes!!


Sent from my iPhone using Xoutpost.com

[Happy]

I went to my local HEB today. Definitely cheered up when I brought these home!

[Maruzo]

Originally Posted by Happy

I went to my local HEB today. Definitely cheered up when I brought these home!

Nice. Are these specialty beers or ingredients for making them?

[Happy]

Originally Posted by Maruzo

Nice. Are these specialty beers or ingredients for making them?

They are a local craft beer here in Houston. However, they normally don’t sell 24 pack 16oz’ers to the public. Their for vendors. I got them for $20 bucks each. A steal, considering a 12 pack of 12oz’ers are like $17.

[Maruzo]

[Clockwork]

I have been cataloguing my spare car parts (by part number and description) using Excel sheet and bin system. 218 so far. Not too many more and sooooo much more organized.

Sent from my Pixel 3 using Tapatalk