|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
12-26-2020, 03:24 PM
|
|||
|
|||
|
Skid Plate Bolts
Nope, not looking to get into the debate about replace or not! I just need a set of the bolts if anyone has the 6 of them laying around. Please let me know. Thanks!
__________________
Dave S. Northeast 2003 4.6is 2005 E53 4.4 2003 E39 Msport(a REAL ONE!) 1959 Fiat 600 
|
|
#2
12-26-2020, 08:02 PM
|
||||
|
||||
|
M10-55 10.9 bolts you can buy at a hardware store. Same for nuts. Squash the nut just a tiny bit to make it self locking.
I bought a set of 12.9 so I can get nearly full tension without self destruct. Covered in a thread on the topic. 7/16" sae grade 8 should also fit without drilling out the hole. The aluminum side needs a washer (or nut with built in) since the bolts clamp with something like 8-10,000#.
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife)
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
