|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
11-28-2021, 08:19 PM
|
|||
|
|||
|
X5 drive shaft problems for 5th time
So first I had carrier bearing failure. Replaced myself. Then c.v joint at rear so replaced entire shaft with rock auto part for around$ 450. Then c.v bad again. Replaced with new shaft from auto parts .com. Then c.v went bad again because of no grease, replaced with rock auto part around $350. Now carrier bearing out again. I thought I was preloadeding bearing by pushing it forward before tightening but that may have caused the problem. So now I think just shoving that thing forward a bit before tightening is not a good idea.
. Last edited by Briansbummerbmw; 11-29-2021 at 01:42 AM. 
|
|
#2
11-28-2021, 08:29 PM
|
|||
|
|||
|
Also
Rock auto sending replacement. So going to gove it another try. This time not pre loading bearing.
Last edited by Briansbummerbmw; 11-29-2021 at 01:38 AM.
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
