|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
No Entrance Lights-No Door Open on Dash
No entrance lights at all. No door open symbol on the dash. No puddle lights. Car acts like the doors are always closed. Doors lock and unlock properly (except passenger front, need to replace actuator). Fuses all good (F1 and F4) I have already tried pressing the dome light button. Lights that do work: Front map lights Rear map lights Rear dome light (manual on, manual off). Does not illuminate upon entrance. Glove box light Luggage compartment lights (on tailgate) |
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
It's possible that the faulty door actuator is causing this - I think the door actuators are controlled via a central system in the driver's door - and this includes the door open sensors. Check the PCB in the driver's door module for corrosion too...
__________________
Wayne 2005 BMW X5 3.0d (b 02/05) 2001 BMW F650GS Dakar (b 06/01) |
|
#3
|
||||
|
||||
|
Scan of faulty actuator? You should be able to unplug the bad actuator and clear errors to test. It's pretty common for a fault like a short to interfere with anything else on the buss.
Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
|
#4
|
|||
|
|||
|
Same here. No interior lights. A black interior makes it really dark at night. Pull fuse 14 and plug it back in. It's a module reset according to info I found this week. I have not tried it on mine. I'll do it tomorrow. Be aware, the alarm will go off!
__________________
'06 X5 3.0i - bought @143,123 miles (12/26/20) |
|
#5
|
|||
|
|||
|
Update-Still need Help
Replaced my faulty door lock (passenger). Still do not have any interior lights. Testing with ISTA, I get this message: All my fuses are good. Can someone point me to more detail or a diagram of what I am looking for. I was not able to retrieve the diagram in ISTA for some reason. I know how to get behind the glove box to the general module, just don't know exactly what I am looking to test.
|
|
#6
|
|||
|
|||
|
All the wiring diagrams and electrical information is in the Bentley manual.
__________________
1988 325is (purchased new) sold 2004 X5 3.0 2005 X3 2.5 2008 X5 3.0 (new to me) |
|
#7
|
|||
|
|||
|
__________________
E39 530dA -02 M-Sport Messing metallic E53 X5 3.0dA -06 Sport Stratus grey E70 X5 40d -12 M-Sport Space grey |
![]() |
| Bookmarks |
|
|
|
|