|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
new euro lights
as some of u know im going 2 facelift my pre x but b4 i start PULLING IT 2 BITS i want 2 make sure i have all parts ready the only thing thats bothering me is the front light wiring i dont know wot conectors r on the existig lights and dont know if any will fit b4 i take them out so can anyone help theres 3 sockets on new headlights as pics below XENON HEADLIGHTS PLEASE NOTE 1ST PIC IS NOT MINE IS THE BOX ON IT UNDERNEATH ON MY PRE FACELIFT LIGHTS & IF SO WILL FIT NEW LIGHTS |
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
Good luck w/ the upgrades and although it will be nice to see all the parts on your X, I can't seem to agree w/ spending all that $$$ for the facelift mod.
Post some pics after you are done.... |
|
#3
|
||||
|
||||
|
the lights only cost 430 us dollars
bumper, fenders,trims,hood 900 dollars facelift alloys with diamaris tyres 900 dollars so its not cost me alot cos part of europian union i can get parts shipped from europe thats why im doing facelift i like the look of the newer model just need few more bits hence this post and new bolts/bits bmw dealer |
|
#4
|
||||
|
||||
|
this is wot i want 2 know
wot r these for on bottom of lights/will i need new 1s if so where can i get them from and wot r they
Last edited by davekatentl; 03-06-2006 at 12:32 PM. |
|
#5
|
||||
|
||||
|
The silver box with yellow labels look like the ballast packs. If you have xenon lights now then you should have a pair of these that will need to be wired into the new light plugs.
|
|
#6
|
||||
|
||||
|
Yes they are the ballasts but I don't know if the wiring plug for the self leveling units are compatible with the plug on the facelift light.
Do the facelift lights have a lever to adjust between LHD/RHD? |
|
#7
|
||||
|
||||
|
The self leveling system will need to be rewired into the new plug. If you want to save yourself a complete new loom and/or you want to change back then open the self leveling on the old units and remove the 4 pin/wire mini loom to wire it into the new plug. It should have 4 blue wires and plugs directly into the stepper motor.
E-mail me if you need photo/more info. PS |
|
#8
|
||||
|
||||
|
where are you ordering all your facelift parts from? i checked w. crevier and bmw has raised the price on almost every single facelift piece
__________________
|
|
#9
|
||||
|
||||
|
Will these lights fit in 2001 X5? If yes, could you please post the part number?
Thanks
__________________
(oOO \ ([[[[)(]]]]) / OOo) |
|
#10
|
||||
|
||||
|
Quote:
|
![]() |
| Bookmarks |
|
|
|
|