Problem with inside doorhandles

[Zebbe]

My doorhadles has started to peel. Anyone else that have the same problem. It doesent look good any ideas what you can do?

This is how it looks

[UCrewX5]

Very common problem. You can replace them, or you can finish pealing the covering off to give them a nice smooth look.

[Zebbe]

Originally Posted by UCrewX5

Very common problem. You can replace them, or you can finish pealing the covering off to give them a nice smooth look.

Ok, some pealing to do!

[Thunder22]

it's covered under warranty, i have 2 of mine replaced.

[Zebbe]

Originally Posted by gresch

it's covered under warranty, i have 2 of mine replaced.

But mine is an -02

[Thunder22]

Originally Posted by Zebbe

But mine is an -02

gotcha.

[Jiga jace1]

How Can You Replace Them? One Of The Rear Ones Is Getting Loose Im Scared Some 1 Is Gonna Pull It And Break It

[Vitriol]

when i had mine replaced, it sounded like they took the whole door apart, i had to drop it off for a whole day to get both front ones replaced. so it might be a pretty big task

[withidl]

For what its worth, if you and your passengers are careful not to dig your finger nails, rings, etc. into the handles they won't peel. I had to have two of mine replaced several years ago under warranty and have been careful ever since and do not have any peeling to this day. You shouldn't have to be overly careful, but its kind of like handling an egg, you know it will break if your not careful, so your careful.

[UCrewX5]

Originally Posted by Jiga jace1

How Can You Replace Them? One Of The Rear Ones Is Getting Loose Im Scared Some 1 Is Gonna Pull It And Break It

You have to remove the door panel. See the DIY on the home page that pertains to the window regulator replacement for info on the door panel removal.