|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
I have a 2002 X5 3.0i, and i was in a small fender bender, it from behind. There seems to be no visible damage to the back bumper except for a small paint scrape, and the right side of the bumper has been pushed in. It looks like it just needs to be pulled out a bit to match the other side. I do not want to take it to an autobody shop and spend hundreds just to fix it. I just need to pull it out a bit. I was wondering if anyone knew how to pop off the bumper, and even it out? Any suggestions are greatly appreciated
|
|
#2
|
||||
|
||||
|
search for the PDC retrofit or the BMW Hitch install..
Kevin (PersonaNonGrata) has a great writeup that includes detailed instructions on how to remove both front and rear bumpers for the PDC retrofit. |
|
#3
|
||||
|
||||
|
Look right on the home page.
|
![]() |
| Bookmarks |
|
|
|
|