|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Xenon or not?
|
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
Check the pics and see if they look like this at the rear. The big round cover and connector in the triangle shaped cover should be there if xenon.
http://www.xoutpost.com/articles/x5/l...on-bmw-x5.html
__________________
Sent via Telegraph Wires using my Morse Key. 2021 X5 xDrive40i 2015 X5 xDrive35i MSport (Traded) 2013 X5 xDrive35i |
|
#3
|
|||
|
|||
|
Yes, it looks the exact same as those pics. Thanks for the tip. Is it easy to change out headlights or should I have someone pro do it?
|
|
#4
|
||||
|
||||
|
are you upgrading from halogen to xenon?
or just a simple xenon to xenon swap?
__________________
... thank you X5world! |
|
#5
|
|||
|
|||
|
xenon to xenon swap
|
|
#6
|
||||
|
||||
|
Quote:
__________________
... thank you X5world! |
|
#7
|
|||
|
|||
|
Thanks for the help everyone! One last question, could someone please tell me the exact tools I need to get this done, I'd hate to begin and then find myself without the proper tools. Also, I don't have the washers on the bumper so it's my understanding I can leave the bumper in place while removing the headlights, but, I need some sort of extension , angled socket wrench is that correct?
|
|
#8
|
||||
|
||||
|
Read my article about removing the light units. You don't need to go near the screws behind the bumper. (I posted it above.)
10 mm socket? or torx set is all you need.
__________________
Sent via Telegraph Wires using my Morse Key. 2021 X5 xDrive40i 2015 X5 xDrive35i MSport (Traded) 2013 X5 xDrive35i |
![]() |
| Bookmarks |
|
|
|
|