CD with NAV and DSP connections picture?

[jtorgon]

Does anyone out there have a picture of the correct connections in the back of the stock CD Changer (2000 X5 with DSP and NAV). I just replaced my AMP and the radio works now but the CD Changer only comes on a changes CD's and tracks BUT NO SOUND!!!

I think maybe I screwed up one of the connections.


Thanks,

Jay

[Tom G.]

Originally Posted by jtorgon

Does anyone out there have a picture of the correct connections in the back of the stock CD Changer (2000 X5 with DSP and NAV). I just replaced my AMP and the radio works now but the CD Changer only comes on a changes CD's and tracks BUT NO SOUND!!!

I think maybe I screwed up one of the connections.


Thanks,

Jay

This article on our support section will show the needed connections:

http://www.europeanautosource.com/su...mod_id=2&id=11

[jtorgon]

thanks TOM G..

YOU ROCK!!!!!!!!!!


Do you know if it matters if I have the SQUARE end of the COAXIAL CABLE on the AMP end and the round side on the CD CHANGER end? That is what I did when I hooked it up which I ASSUME is causing my lack of sound problem???

I am going to swap them back anyway but I just thought I would ask.


Thanks again,

Jay

[Tom G.]

If you have a MY00 X5 with DSP, you need the coaxial cable connected from the factory amp to the CD Changer. The 6-pin harness is a dead connection.