|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#2
04-02-2007, 11:14 AM
|
||||
|
||||
|
You need a heat gun. Hair drier is too cool to work. Need the air to be at or around 200° to melt the glue.
__________________
Sent via Telegraph Wires using my Morse Key. 2021 X5 xDrive40i 2015 X5 xDrive35i MSport (Traded) 2013 X5 xDrive35i 
|
|
#3
04-02-2007, 06:21 PM
|
|||
|
|||
|
I read somewhere that one person used a hairdryer. I dont know if i believe them, but it might be worth trying if you have one laying around. If not pick up a heat gun as mentioned above. I think they are about $15 at a hobby shop.
__________________
2002 4.6is Dinan S2 Titanium Silver/Black Alcantara DINAN Stage 4 Engine Software Automatic Transmission Software High FlowThrottle Body Free Flow Exhaust Cold Air Intake System High Flow Air Mass Meter OTHER CCFL Angel Eyes Stealth XM Radio in ashtray : FM Mod Pilot H3 Fog Bulbs Cleared Headlights: Hi/Lo Beams Hardwired Radar Detector IN PROGRESS Powerstop C/D Rotors: (on backorder) W/EBC Red Stuff (F) W/Axxis Deluxe (R) Dice Ipod: Aux Input for XM THINKING SMG II MK4 Bluetooth
|
|
#4
04-02-2007, 07:19 PM
|
|||
|
|||
|
you can use a hairdryer, but it will take forever. buy a heat gun and save yourself some time.
__________________
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
