|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
07-12-2007, 02:38 AM
|
|||
|
|||
|
Garage door opener? broke?
The red light does not light up or anything when i push the garage door opener.. It has been around 95-103F around here, something my car has never seen, so im wonderin maybe the weather killed it? anyone know what the deal is?
__________________
|
| Sponsored Links | |
|
|
|
|
#3
07-13-2007, 02:10 PM
|
|||
|
|||
|
anyone else got any suggestions?
what do u mean by clear and reprogram... as in the garage door opener itself? I would do that, but the buttons for the opener dont even light up(no blinkin or nothin') so i dont know if im reprogramming it/clearing it
__________________
|
|
#5
07-13-2007, 08:16 PM
|
||||
|
||||
|
Clearing means put ignition in first on position.
Hold down Button 1 and Button 3 for about 1/2 minute until LED starts blinking rapidly Integrated universal remote control is reset (cleared) to null Depending on what type of GDO you have (fixed or rolling) determines next step. I just followed the one on the main forum page to make mine work. ED Last edited by edco; 07-13-2007 at 08:28 PM.
|
|
#6
07-14-2007, 07:21 AM
|
|||
|
|||
|
I just programmed mine. The operators manual only tells half of the story. Make sure you use your original remote to program the buttons in the X5. Then you have to program the motor of the garage door opener to work with the X5. There are program buttons on the back of the garage door motor. You will need a ladder. The operators manual doesn't tell you about the 2nd part.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
