Need Part Number for Bumper Support Wheel Flare rear piece Install

[DocMike]

what is the part number for the retaining springs to install the bumper support.
the install calls for 14 of them

[bsprtsgrp]

If you are referrring to the 4.6/4.8 rear wheel flares they come in a kit. I'll post the part number of the kit along with the part number for the spring retainers once I pull my receipt from my dealer at home.....

[DocMike]

Yes the 4.6/4.8 flares, i ordered all parts from morristown. i ordered part number 51117073517 today from stealer locally. I don't know what that part is however, but he said it was kit. I am trying to install 51-12-7-046-920 and 51-12-7-046-919

ARCH REAR LEFT 51-71-7-049-869
ARCH REAR RIGHT 51-71-7-049-870
LEFT BUMPER TRIM 51-12-7-046-919
RIGHT BUMPER TRIM 51-12-7-046-920
ARCH FRONT LEFT 51-71-7-049-867
ARCH FRONT RIGHT 51-71-7-049-868

[bsprtsgrp]

51-11-7-073-517 is the Installation Set which includes the spring locks

also on my dealer invoice is...

01-29-0-402-662 Which is the Jig to align the holes for the flares
51-71-8-219-511 Rivets (2)
51-71-7-002-953 Rivets (25)

[DocMike]

Originally Posted by bsprtsgrp

51-11-7-073-517 is the Installation Set which includes the spring locks

also on my dealer invoice is...

01-29-0-402-662 Which is the Jig to align the holes for the flares
51-71-8-219-511 Rivets (2)
51-71-7-002-953 Rivets (25)

So do i need the 30 rivets and 8 push rivets with this kit or do i need a different kit for install? Not to sure what spring locks are

http://www.xoutpost.com/x5-e53-forum/...es-help-2.html post #14 list different parts entirely so now I am really lost

[bsprtsgrp]

I just had the Body Kit installed a month ago and I needed to order the installation kit myself. I am reading that part number directly from my service invoice for the installation. There were only 2 of these rivets (51-71-8-219-511) in the kit, the rest of the kit included the the jig (01-29-0-402-662), and 25 other rivets (51-71-7-002-953) that hold the front of the flare which extends off of the running boards.

I posted the PDF instructions for the installation in another thread that's running here for you.....

[2002Silver4.6is]

Originally Posted by DocMike

Not to sure what spring locks are

"Spring Locks" would refer to the metal clips that go on the back of the Bumper Support.

[DocMike]

alright at body shop now, and looks like i will have to do flares myself

[2002Silver4.6is]

What is the body shop doing and what part are you doing?

You might ask a few X5 World members to come on over and give you a hand. Make a day out of it! Amazing the amount of help a lil free food and beer can get you! Not sure if it would work but you could plan with Phil of the Detailing Forum (he is in NJ) to do a detail or two at the same time you have folks over to install the parts..... just an idea....

If I was up north I would give ya a hand!!!!!