Non functioning Keyless entry/Door Module

[kikiluv74]

Step 1: Make sure all doors are closed.

Step 2: Insert the key into the ignition and switch it to position 1. Turn it back again. Repeat this 4 more times. Then remove the key from the ignition.

Step 3: Press the "Lock" button three times while holding down the "Unlock" button. The door locks will then cycle to confirm that you did correctly.

Step 4: Repeat step 3 for each fob that you need to program.

Step 5: Exit the programming mode by inserting the key into the ignition and turning it to position 1 and then taking it out.

I did this today and it worked for me... Good luck and I hope this helps