4.6is foglights are loose - any way to tighten them?

[Dr_Smith]

I've noticed, when washing the X, that the fog lights are quite loose andvery easy to move around in the bumper - has anyone experienced this and is there some way I can tighten them up? Also, with regards to the seat memory, should this apply to mirror position as well?

thx guys!

[4.6is Ryder]

Hey Smitty, to tighten the fog lights, remove the rings from around them and just tighten the 2 philips screws....and yes the mirrors are part of the memory system.........Phil

[JV]

Originally Posted by 4.6is Ryder

Hey Smitty, to tighten the fog lights, remove the rings from around them and just tighten the 2 philips screws....and yes the mirrors are part of the memory system.........Phil

Also make sure the metal clips for each screw to screw into are still there. If those are gone from the last time someone removed them, there's a problem. They are clips that fit right over the plastic mount, square in shape, with a tapped hole in them. Part #4, the so-called body nut, on this page:
http://www.realoem.com/bmw/showparts...96&hg=63&fg=15

JV

[statdoc]

Originally Posted by JVZ104

...the so-called body nut,
JV

Are you talking about those videos again?