Angel eyes installation

[Przn_Pouya]

Hi, i just bought the angel eyes kit and i wanted to install them but i wanted to get some tips about installing them before i brake my headlights trying to seprate the lenses. If you ahve installed them on your car or you know about installing them, please leave me some tips.

If you have a shop or know how to install them, please leave me your prise and email address.

Thank you.

[broknlgs24]

what year X5 do ya have?
there are plenty of write-ups concerning this already.
did ya check any of those out?

[Przn_Pouya]

ya i have, I actually tried to do it myself and i put the headlight in the oven, and i ended up melting the clips that the screws go on at the top. If you guys know anywhere i can send the headlights to and get them fixed, please leave a msg.

I cooked it for 200F for 10 min, it didnt get soft at all, i tried 5 min in 300F and it ended up melting. It ust melted the clips but i want someone to do it cheap.

Its a 2001 X5 4.4 and the kit is BAVARIAN off of ebay.

[powers1]

Originally Posted by Przn_Pouya

ya i have, I actually tried to do it myself and i put the headlight in the oven, and i ended up melting the clips that the screws go on at the top. If you guys know anywhere i can send the headlights to and get them fixed, please leave a msg.

I cooked it for 200F for 10 min, it didnt get soft at all, i tried 5 min in 300F and it ended up melting. It ust melted the clips but i want someone to do it cheap.

Its a 2001 X5 4.4 and the kit is BAVARIAN off of ebay.

Have you asked Bavarian for installation instructions?The X5 kit is recent for them and they installed it on a customers X5 3.0i pre-2003,and they have installation notes!Contact them.....

[SCMaximaSE]

Originally Posted by powers1

Have you asked Bavarian for installation instructions?The X5 kit is recent for them and they installed it on a customers X5 3.0i pre-2003,and they have installation notes!Contact them.....

dunno if instructions would really help us because we had a hard time opening the lense. thats our main problem right now

-Mike

[powers1]

Originally Posted by SCMaximaSE

dunno if instructions would really help us because we had a hard time opening the lense. thats our main problem right now

-Mike

Bavarian MUST have instructions ro remove the Lenses from H/Lights.This is the most difficult part of the installtion!!!!!!The rest is straight forward!

[94502]

hmm just yesterday i helped my friend with his angle eyes on his 04 3 series and we baked it for 15-20 min at 200F and none of the clips melted.. try scraping some of the glue out and use a good flathead screw driver to pry it open...