Do stock center caps fit Eurotech Wheels??

[X5Dawg]

For those of you that have Eurotech wheels - has anyone switched out the center caps and if so, does the OEM size caps fit these wheels?? The caps that came with my wheels are peeling and I am looking to replace them, but not sure if the OEMs will fit. I have not been able to figure out a way to pop out the center caps without taking the wheels off - that is why I am asking.

[X5 Meister]

Get a suction cup of some sort. Like the kind that is typically attached to the baskets that mount in the shower (or even better, one of those GPS windshield mount suction cups that has a lever). Wet it a little, press firmly on the center cap and pull. Should do the trick. The bigger suction cup the better. The cap diameter is 68mm according to BMW's spec. Also realize there are 2 styles of center caps now, both 68mm diameter. The old cap on the left is P/N 36 13 6 768 640 and came on all the E53 X5's. The new cap on the right (has a chrome outer ring and is convex) is P/N 36 13 6 783 536 and came on all the E70 X5's. Some BMW parts sources classify the old one as being superseded with the new one, but if you prefer the look of the old one you should still be able to pick it up without too much problem.

[X5Dawg]

Thanks for the tip - I'll give that a try.

I am using a piece of junk caliper from Harbor Freight to measure the diameter and my original center caps are measuring about 68.5 mm and it appears the ones that came on the Eurotech wheels are about slightly larger.

[X5 Meister]

See my edits above. Also here is a type of suction cup that would work well. It's from a GPS window mount.

[X5Dawg]

Thanks for the update - the ones on the left are the ones that I have from my original "girly" wheels.

[X5 Meister]

Girly wheels? Those didn't have center caps. And I believe they came stock on the Alpina 4.8is.