|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Gear Shift Lever repair???? Any help???
Last edited by bmwdude; 10-29-2008 at 12:03 AM. Reason: Needed to make this a question. |
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
What issue are you having??
__________________
2001 X5 3.0i (PP/WP/AP) Traded at 213K miles RARE White on Black - Why does everyone get Tan?? ![]() First E53 with 215s on XOutpost!! ![]()
|
|
#3
|
|||
|
|||
|
The lever gets stuck and then goes back to being fine. I had it in for an oil service and the tech told me it's a small white urethane grommet that is broken and there is no replacement. I had to buy the whole gear leaver box kit. 980.00 total with Labor because it take a lot to get this all off and the new one back on.
|
|
#4
|
||||
|
||||
|
I had an issue with mine getting stuck going from auto to manual shift mode and back. I ended up putting some grease on the white poly grommet and it seemed to take care of it for the most part.
__________________
2001 X5 3.0i (PP/WP/AP) Traded at 213K miles RARE White on Black - Why does everyone get Tan?? ![]() First E53 with 215s on XOutpost!! ![]()
|
|
#5
|
|||
|
|||
|
Thanks but my white grommet is actually broken out. I appreciate the replies though.
|
![]() |
| Bookmarks |
|
|
|
|