Who's interested in opening 04+ headlights

[TwinsPoppa]

Calling all modders ...

I found a solvent that will "eat" cured silicone. However, smallest size is 5 gallon bucket and is $325 plus $57 shipping. I'm checking if anyone is interested in buying-in for a portion (relative to how much you want) to offset the cost.

I've been experimenting with opening 04+ headlights and it's possible to manually remove the silicone (would take forever though) or a quicker way is to cut some bits off to get easier access to the silicone (but I think this would compromise the strength of the lense).

I think the best & proper way is to use this solvent. I will most likely do this without any takers anyways but I figure I'd ask. When I have my original OEM Bi-Xenon, adaptives opened, I'm going to paint or mod the amber lense similar to the euros - then sell them since I have the euros already.

So, if you always wanted to open your 04+ headlights to mod them. I'll have the stuff to make it a WHOLE lot easier.

[X5Dawg]

FYI, there is something similar that you can buy at Home Depot that is supposed to dissolve cured silicone caulk - comes in a squeeze tube. Might be worth a shot before spending so much on that bucket of stuff.

Just be careful - you don't want to get a solvent that is too strong to where it might damage all the plastic.

[TwinsPoppa]

Originally Posted by X5Dawg

FYI, there is something similar that you can buy at Home Depot that is supposed to dissolve cured silicone caulk - comes in a squeeze tube. Might be worth a shot before spending so much on that bucket of stuff.

Just be careful - you don't want to get a solvent that is too strong to where it might damage all the plastic.

Hey .. Thanks for the tip. I'm going to experiment with it (DAP silicone remover). If it doesn't work, I'll go to my original plan. Been reading mixed reviews with DAP. I'll confirm that the other stuff doesn't affect plastic. I know that it will eat nylon.

Originally Posted by ZsX5o3

how are people opening them to change the angel eyes? I know some people have changed them, right?

I think those are the pre-facelift headlights which they say can easily be opened by baking. Not so for the 04+ headlights.

[TwinsPoppa]

Bad news. The solvent I found will affect plastic. As a matter of fact, the rep says that any other solvent/chemical would probably affect the plastic too.

So, considering all this I'm gonna drop this project for now. I'm going to re-think this some more first before deciding what to do with my old headlights.

[ZsX5o3]

nope, I'm talking facelift. here's two people that have done it.

TQ2K & jpm4.8is

[mrbmwx5]

Originally Posted by ZsX5o3

nope, I'm talking facelift. here's two people that have done it.

TQ2K & jpm4.8is

you are misunderstanding to the original post.
the one you talking about is those people only changed out the lights bulds,and thay did not open up the head lights to changed the AE rings.
But twinpapa was talking about how to remove the ambers turn lence.

[ZsX5o3]

how are people opening them to change the angel eyes? I know some people have changed them, right?

[ZsX5o3]

I understood the post, I just thought they had to open them to change AE's, my bad.

[TwinsPoppa]

I was looking over my old headlights the other night and all of a sudden these popped into my hands somehow:



Wonder how that happenned?

[patrob]

So is that mean you were able to open them up??

I am trying to see if anyone had any luck opening up 03 headlight?? (dated 08/2003)