|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
Found wife's dream X5 4.8is
Also, I don't think it has the sliding rear floor and I remember someone saying its not that useful unless you're like below 5 ft tall. Well, my wife's 5 ft tall so how hard and how much is it going to cost to retrofit that? ![]() Lastly, how hard and how much is it to put the trailer hitch on? Thanks for any advice! JT |
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
BTW, hello everyone! Been lurking on here for awhile. Nice site with good info. This is where I get all my Navi updates for my 740i! Hope to be an X5 owner soon, well, at least for the wife's sake.
|
|
#3
|
||||
|
||||
|
Happens to some. It's not a game changer though especially if you're under warranty. Read this for one of the worst case scenarios:
http://www.trucktrend.com/roadtests/..._x5/index.html You'll get lots of different opinions on the sliding load floor. I had the option and didn't want it because it does add a little height to the trunk floor thereby further reducing space a little bit. Plus I didn't think it was particularly useful to me. The retrofit CAN be done, BUT you'll have to buy all the parts individually and they will cost you a heck of a lot more than it would preinstalled in your car (it was a $380 option). http://www.xoutpost.com/articles/x5/m...-retrofit.html It technically is a retrofit, but since there is no retrofit "kit" per se, there are no corresponding instructions on how to do the retrofit! Something else to consider that is IMHO incredibly important is that sliding load floor is quite rigid and heavy. In the event of a rear end collision you don't want that big plank coming barreling into the backs of the rear seat passengers. Thus BMW specifically engineered it to rise up in the event of a rear end collision rather than move simply straight back. So if you attempt this retrofit you better be comfortable with the proper installation of what is essentially also a safety device. So I don't know for certain, but one could imagine that BMW's omission of retrofit instructions for this item wasn't an oversight, but intentional. Trailer hitch. Don't even ask. It's sold out in North America / Canada and discontinued. Long story. BMW are working on developing a new one but apparently it is still months away and no one knows if it will install / integrate the same way as the old one. If you are interested in seeing the old one, the installation instructions are on the home page. Last edited by X5 Meister; 03-04-2009 at 06:12 AM. Reason: Important note |
|
#4
|
||||
|
||||
|
Hello JT//MC, welcome. X5 Meister hit it right on the head about your questions. Regarding the full air suspension, problem is a hit or miss. For me it was a hit but covered under CPO. Just about every component was replaced including the compressor. So far so good now. Its been about 18 months with no real issues. However I had to reset the error message twice since (compressor overheat error). I'm out of warranty now but luckily my Indie has a GT1 DIS. Do a search for "selflevel susp inact" here on x5world. You will find a lot of info. It wouldn't be a deal breaker for me either but its best to know about it. When you check out the 4.8is, you might want to raise an lower the suspension a bunch of times to see if it triggers the error. Before mine was overhauled, it was super sensitive and the error message plagued me. Also, when the full air system is inactive, the ride quality sucks big time. I couldn't stand it and would drive my other cars until is was repaired. Researching the service records on the vehicle would be good idea. BTW full front/rear air is standard on the 4.8is, optional on the 4.4i.
|
|
#5
|
||||
|
||||
|
cool guys. if and when we get it, I'll be posting up pics!
|
|
#6
|
||||
|
||||
:xoutpost:
__________________
|
|
#7
|
||||
|
||||
|
Hey Zerochief - doesn't the owner's manual specifically say NOT to press the suspension height button a bunch of times or it WILL overheat the system and render it temporarily inactive? I think I did it once before I read the manual and overheated it, but no issues since (knock on wood).
|
|
#8
|
||||
|
||||
|
:xoutpost:
![]() Post pics once you buy it!
__________________
/ / / Michelle Administrator, Moderator, and Premier Member My Bimmer Garage 2018 F15 X5 35i M Sport (Sept 2020 to May 2026) 2012 E70 X5 35d (Aug 2015 to Sept 2020) 2008 E70 X5 3.0si (Aug 2011 to Aug 2015) 2001 E53 X5 4.4i (May 2005 to May 2012) Support Xoutpost.com & become a Premier Member | Join the BMW CCA Rest In Peace SuperGreg <3 |
|
#9
|
||||
|
||||
|
Quote:
UPDATE: E53's see page 13: Hydraulic Level Control & Air Suspension Systems Document Last edited by zerochief; 02-28-2009 at 12:39 AM. Reason: Document found member viewing - link corrected |
|
#10
|
||||
|
||||
|
Says the doc is not available right now. Thanks for clarifying that procedure. I was going to push it a bunch of times!
Last edited by JT///MC; 02-28-2009 at 12:40 AM. |
![]() |
| Bookmarks |
|
|
|
|