|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
07-19-2009, 12:40 AM
|
||||
|
||||
|
Bad Cam Sensor...
Okay I pulled out a code that read I have a bad cam sensor in bank 1. I think that's the exhaust cam sensor. But here's my issue.. Lately I have been hearing more of my valves knocking. It's not loud like I blew something but it just sounds like I'm having a timing issue.
Would a bad cam sensor cause this type of valve knocking or bad timing? I did read up on a the DIY page that after replacing the faulty cam sensor, the motor ran smoother. 
|
|
#2
07-19-2009, 03:49 AM
|
||||
|
||||
|
Yeah, it could... as the DME uses the cam signal to compare to the crank signal for comparison and that tells it the vanos positions and how far advanced or retarded to put the ignition. If it doesn't see cam signal properly it will advance the ignition to the point of pre-ignition causing valve knock. The knock sensors will keep this in check mainly, but it should smooth out nice once you replace the sensor.
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is 
|
|
#5
07-19-2009, 01:17 PM
|
|||
|
|||
|
cam sensor
hi everyone...just some info..i would like to replace the cam position sensors..not to much info for the 4.4...can anyone give me some insight on location and ease of change..i did a search but more info on 3.0 than 4.4....thanks rob
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
