|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Anyone used suspension parts from eBay aftermarket?
BMW X5 E53 Control Arm Arms Ball Joint Bushing Link Kit:eBay Motors (item 140303800309 end time Sep-22-09 14:10:57 PDT) Has anyone used this suspension kit? Results? |
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
Please do not make the mistake of using aftermarket Control Arms or Ball Joints. DO NOT believe in there fake marketing scheme that gives you "Life time warranty's". Believe me the OEM will last and after market wont.
|
|
#3
|
|||
|
|||
|
any more ideas?
|
|
#4
|
||||
|
||||
|
it will, but not as the OEM.. and the difference is not that much, so consider paying labor double which is high, while the part difference is less than $20
__________________
2008 BMW X5 4.8i Navigation Bluetooth Rear Entertainment Aerodynamic kit DVD, CD, TV Projection |
|
#5
|
||||
|
||||
|
If the savings were, say...half, then I'd try them. I have to admit that I've had nothing but GOOD luck with items I've bought on Ebay and found quality to be fine.
__________________
Cheers! Chris 03 X5 02 Acura 88 Mustang GT Ragtop 88 Campion Allante 195 99 Itasca 29 |
|
#6
|
||||
|
||||
|
I bought and installed all from the same vendor.
Lower control arm was messed up but decided to do both sides. Had to get a few of the nuts from the $tealer - Nuts & Bolts were out of stock. Non-OEM parts work for me. Both Autozone half shafts going strong(CV boots intact, no vibration) for over 20k now. If you had to buy each of those suspension parts from the $tealer for one side, you would be lucky to achieve a $100 saving over these non-OEM parts.
__________________
|
|
#7
|
|||
|
|||
|
aftermarket control arms
I have a set of BMW UPPER AND LOWER control arms. I will sell you for cheap that need new bushings. Buy the BMW or urethane bushings and take it to a shop to get them installed and then out in your new BMW control arms and rinse and repeat..
Last edited by X5NTahoe4u; 10-01-2009 at 07:17 PM. Reason: missed something- quick on the trigger |
|
#8
|
|||
|
|||
|
yes please pm me i sold the x. and no longer need them
|
![]() |
| Bookmarks |
|
|
|
|