Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Front Drive Shaft Bolts Won't Break Loose! Any Advice? Front Drive Shaft Bolts Won't Break Loose! Any Advice?
Fluid Motor Union
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-05-2016, 11:22 PM
Member
  
Join Date: Feb 2016
Location: 76272
Posts: 105
SeanIngstrum is on a distinguished road
Front Drive Shaft Bolts Won't Break Loose! Any Advice?
I finally got a chance to get the x5 jacked up and I can not break the bolts loose where the front drive shaft meets the flex disc. Tried penetrating oil overnight, but to no avail. The flex disc is pretty beat up, is it possible the bolts could be bent a bit? Seems unlikely, I know, but anything is possible with my luck. I'm all on my own doing this so I may need to wait til I have some help. I tried a cheater bar, but room is limited. Any advice? Thanks so much!
Reply With Quote

Sponsored Links

  #2  
Old 05-05-2016, 11:48 PM
Member
  
Join Date: Nov 2013
Location: Maryland
Posts: 1,165
David.X5 is on a distinguished road
1/2"-drive ratchet with a telescoping handle works wonders. As does a BFH onto a box end wrench (did I say that out loud? I would never treat my tools like that....)
__________________
David.X5
2001 X5 4.4i Sport
SOLD! at 160k miles
Reply With Quote
  #3  
Old 05-05-2016, 11:50 PM
Member
  
Join Date: Nov 2013
Location: Maryland
Posts: 1,165
David.X5 is on a distinguished road
Like this


http://www.amazon.com/gp/aw/d/B0013V...NDJJXZDY13YDP1
__________________
David.X5
2001 X5 4.4i Sport
SOLD! at 160k miles
Reply With Quote
  #4  
Old 05-06-2016, 12:07 AM
Member
  
Join Date: Feb 2016
Location: 76272
Posts: 105
SeanIngstrum is on a distinguished road
Quote:
Originally Posted by David.X5 View Post
1/2"-drive ratchet with a telescoping handle works wonders. As does a BFH onto a box end wrench (did I say that out loud? I would never treat my tools like that....)
Awesome! I'll give that a shot. Thanks!
Reply With Quote
  #5  
Old 05-06-2016, 05:30 AM
Member
  
Join Date: Jun 2015
Location: Southlake, Texas
Posts: 2,094
X53Jay4.8is is on a distinguished road
Quote:
Originally Posted by SeanIngstrum View Post
I finally got a chance to get the x5 jacked up and I can not break the bolts loose where the front drive shaft meets the flex disc. Tried penetrating oil overnight, but to no avail. The flex disc is pretty beat up, is it possible the bolts could be bent a bit? Seems unlikely, I know, but anything is possible with my luck. I'm all on my own doing this so I may need to wait til I have some help. I tried a cheater bar, but room is limited. Any advice? Thanks so much!
1/2 inch impact wrench should do the trick.
Reply With Quote
  #6  
Old 05-06-2016, 02:41 PM
Member
  
Join Date: May 2013
Location: Houston
Posts: 117
mofoaka is on a distinguished road
Heat up the bolt with blow torch. Since your guibo is going to replaced.. 10-20 seconds of high heat should do the trick
Reply With Quote
  #7  
Old 05-06-2016, 06:43 PM
Member
  
Join Date: Feb 2016
Location: 76272
Posts: 105
SeanIngstrum is on a distinguished road
Quote:
Originally Posted by X53Jay4.8is View Post
1/2 inch impact wrench should do the trick.
Got one, I'll try it...thanks a lot!
Reply With Quote
  #8  
Old 05-06-2016, 06:44 PM
Member
  
Join Date: Feb 2016
Location: 76272
Posts: 105
SeanIngstrum is on a distinguished road
Quote:
Originally Posted by mofoaka View Post
Heat up the bolt with blow torch. Since your guibo is going to replaced.. 10-20 seconds of high heat should do the trick
Didn't think of that! Good call. Thanks so much!
Reply With Quote
  #9  
Old 05-08-2016, 02:47 PM
Member
  
Join Date: Feb 2016
Location: 76272
Posts: 105
SeanIngstrum is on a distinguished road
Got it! Thanks for all your help guys!
Reply With Quote
  #10  
Old 05-17-2016, 11:44 PM
Member
  
Join Date: Apr 2015
Location: Sacramento
Posts: 194
stiubhartach is on a distinguished road
I second the blow torch. Never had it fail. Warning: get a heat shield from a hardware store. Plumbing department, used for copper soldering.
__________________
2005 X5 4.4i SterlingGrau, Sport Package, DSP
Build 3/12/2005
Reply With Quote
Reply
Page 1 of 2 1 2

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Xoutpost - Sponsors - Archive - Top

All times are GMT -4. The time now is 08:06 AM.
vBulletin, Copyright 2025, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.