|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
EBC Red Stuff Squealing after bed in advised in forum
Hi All,
I just put on new OEM rotors and EBC red stuff pads on the rear of my car after following the DIY on this forum. I put on some anti squeal grease on the back of the pads and on the caliper part where the pads sit on. Then, i followed the high speed bed in process recommended from the DIY, going to 50-60 and slowing to 10, probably 6 times. On the last few times, it started to squeak really bad. I have read that red stuff squeaks for the first 500-1000 miles, and i wanted to make sure that this is usually what happens? However, i am worried that i did the bed in wrong. I went on the EBC site and found out their recommended bed in process is the exact opposite of what i read on the forum! It recommends to not apply heavy force on the brakes for the first 3-400 miles. Troubleshooting Information | EBC Brakes Can someone tell me if the high speed bed in was a mistake? And if it wasnt, will the squeal stop after a few hundred miles? its really loud as it comes to a stop. thanks |
Bookmarks |
|
|
|