4.8is Rear bumper has a gap left side

[Pisendar]

Rear right side have a gap. I was trying to kind lift the bumper but is sitting tight and doesn't let me to adjust it. I was thinking to take bumper off and see what it is holding bumper down.
Anyone can guide me how hard it is to take it apart or just better take it to local shop.

Sincerely Pisendar

[Allstarsrd12]

On the inside, on each side there are two little slot type of pieces that slide onto the frame. There's one in front and one in back. In the picture you can see the back one in the upper right hand corner. That one probably came loose. If your comfortable doing it, you can try to pull the bumper back and up and try to get it back on there, then slide it forward. Best bet is to probably take the bumper off. Really easy. just need a t55 torx, and I believe an 8mm socket. three little 8mms screws on each side, then the big t55. Remove, then slide back on into the tracks.

[Pisendar]

thanks ... i will try to take it off