|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#3
12-31-2010, 01:11 AM
|
|||
|
|||
|
Well I have had alot of issues with my 05 4.8is, such as the 4x4 Dsc abs and in active suspension I have replaced a wheel speed sensor and I replaced the wheel bearing and hub and axle on the drive because that's the one that won't read on a meter all connections are fine. Today finally I got them to all go away accept The in active suspension. Took to the stealer and they are saying it is the ride height control module and that it has a fault in it. They want 1500 dollars but I'm declined because when I asked them if this will fix the problem they couldn't guarantee it. My ride height adjustment switch will not work and my passenger side sits about a inch lower then the drivers side. Do u know if this sounds like a internal fault from the control module?
|
|
#4
12-31-2010, 12:12 PM
|
||||
|
||||
|
Alas,..... and sadly, ... I'm betting on the module.
The wheel sensor says.."Yes, this wheel is turning." ..and sends that info to whatever module needs the info....ABS, hill descent, DSC, X-drive,... but not leveling. Hall effect sensors send this data. I am not as familiar with the 4.8 as I am with the 4.6, but, My wager is on a wonky module. HTH
__________________
2002 X5 4.6is, Black Sapphire on Black 1997 328is, Black on Gray 2003 SL500, Black on Gray UH-1H Helicopter, Yellow
|
|
| Bookmarks |
|
|
|
|
Linear Mode
