|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Vibration/ rumble at 78+, stumped
If this was my 528 I'd think either the front wheel bearings or the center support bearing where bad. But in my case it started after the trans was put it. Might be pure coincidence of course. Anyone else every have similar issues?
__________________
'04 E53, 4.4 Sport '97 E39 528i '86 911 Carrera, track car '96 BMW R1100R |
Sponsored Links | |
|
#2
|
||||
|
||||
I wonder if they failed to preload the center support bearing correctly.
Anything in the driveline after the trans needs to be inspected. Half-shafts, driveshaft, etc. Since it doesn't matter what gear you are in and it does matter what speed you are going, then I'd look at all these and the connections (bolts, etc.) to ensure they have been correctly installed. Lots to look at unfortunately...
__________________
Kirk Las Vegas 2016 X5 40e Mineral White/Black Dakota Leather, ZLL, ZCW, ZDA, ZDB, ZPP, multi contour seats, rear side window shades, HK stereo 2011 E90M3, 6-speed manual |
#3
|
||||
|
||||
could be a loose or damaged guibo(flex disc) get under your x and start inspecting her out
__________________
![]() |
![]() |
Bookmarks |
|
|
|