|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
01-17-2011, 07:44 PM
|
|||
|
|||
|
Liftgate handle gasket
if so, can you verify for me that this part number is indeed correct? 51137062294 it says part 28 on realoem.com RealOEM.com * BMW E53 X5 4.6is TRUNK LID/REAR WINDOW but part 28 doesn't really look at all like what i thought the gasket looked like.
__________________
| E30 M3 | E34 M5 | E91 328xi | E53 X5 4.6is | E38 740i M-Sport | 
|
| Sponsored Links | |
|
|
|
|
#3
01-25-2011, 10:32 PM
|
|||
|
|||
|
i installed the new gasket yesterday, it's a small rectangle that fits around the harness connector opening. Does anyone know if this is the only way for water to get into the hatch/liftgate handle housing?
I noticed on mine that the 4 torx screws that hold it onto the liftgate didn't have any gaskets. I also noticed that after installing the new gasket, the handle sits a tiny tiny bit less snug up to the body. I think it's because the new gasket is not flattened like the old, but i'm not sure.
__________________
| E30 M3 | E34 M5 | E91 328xi | E53 X5 4.6is | E38 740i M-Sport |
|
|
| Bookmarks |
|
|
|
|
Linear Mode
