|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
03-20-2011, 04:54 PM
|
|||
|
|||
|
03+ headlight glue that won't melt to install angel eyes
Never stopped me
 I tried to heat them first since they are 7/02 I thought MAYBE, but no...... they weren't budging and I have written several DIY's for headlight before so I knew immediately these were hi temp glue headlights. Dremel time I simply dremeled the line, popped them open, did the AE install, siliconed them back. About 4 hours each headlight with 75% tach time on the silicone. They went back perfect, and the silicone dried crystal clear so even if you could see it (which you cannot after you put the rubber strip back on the headlight) then it wouldn't be an issue either way. I wasn't wasting a year looking for 01-02 headlights and buying more when I already have some nice ones so this was the result            
__________________
~2003 X5 4.4i~ 
|
| Bookmarks |
|
|
|
|
Threaded Mode
