|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
04-30-2011, 04:39 AM
|
|||
|
|||
|
Rear Door Central Locking Busted
So off I go , stripping down the door card to take a look inside and see what I can see. Not sure what's wrong but I guess I'll work it out. I always hate removing door cards because it's so easy to damage the clips when removing them, and getting the card back on can be a nitemare.
__________________
2001 X5 4.4i 
|
| Sponsored Links | |
|
|
|
|
#2
04-30-2011, 07:29 AM
|
||||
|
||||
|
From the sound of it you will need to replace the door latch. The central locking actuator is built in to it. Also, make sure the foam barrier is fully intact and properly stuck, especially the bottom half... If it isn't water can get on the rear floorboard, which is never fun!
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is 
|
|
#3
07-31-2011, 01:49 PM
|
|||
|
|||
|
I haven't gotten round to this yet but I'm just about to order the door lock actuator. Before I do .....
That door will not open or lock with the lock button on the centre console. It doesn't lock when you hit 5mph and all the other three do. I does not unlock with the remote fob. BUT - it will lock with the remote fob.  I'm guessing a new actuator is the thing to do, but isn't it odd that the door locks with the key fob ? And one more thing. The actuator isn't a part that needs to be coded to the car, is it ?
__________________
2001 X5 4.4i
|
|
#4
07-31-2011, 11:23 PM
|
||||
|
||||
|
Yes, it does sound like the actuator is the culprit. And no, it is not a coded part... just plug and play.
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is
|
|
#5
08-01-2011, 08:54 AM
|
|||
|
|||
|
My rear n/s door is a bit flaky, probably only a 1-in-10 chance of it unlocking, but always locks again no problem.
How much is an actuator ? It's low on my priorities but I guess I may as well pick one up next time I'm buying parts.
|
|
#6
08-01-2011, 10:37 AM
|
|||
|
|||
|
I'm seeing one for €133 online. My main reason for attending to it is because that door is used a lot because my young daughters child seat is at that side of the car. It's a pain in the ass having to hold her on one arm, open the front door, reach inside to open the back door.
__________________
2001 X5 4.4i
|
|
#7
08-01-2011, 02:42 PM
|
||||
|
||||
|
Quote:
 I did my drivers side rear door a few months back. Found a used one one ebay for £25. Works a treat-bargain!
|
|
#8
08-01-2011, 02:50 PM
|
|||
|
|||
|
Quote:
__________________
2001 X5 4.4i
|
|
#9
08-01-2011, 02:50 PM
|
|||
|
|||
|
Quote:
__________________
2001 X5 4.4i
|
|
| Bookmarks |
|
|
|
|
Linear Mode
